Click here to get back home

My Dash doesn't synchronize through Bluetooth...
 Home | NewsGroups | Search | About
Login Password
Register Now!
 microsoft.public.smartphone    Post an article   get this group's latest topics as an RSS feed add this group's latest topics to your My MSN content add this group's latest topics to your My Yahoo content
Subject Author Date
My Dash doesn't synchronize through Bluetooth... Frank 06-05-2007
Posted by Frank on June 5, 2007, 4:07 pm
Please log in for more thread options
 Hi,

I got a new T-Mobile Dash and upgraded it to MS Mobile 6.0.
I have a Dell Latitude D610 with Bluetooth Stack from Toshiba v4.00.20(D).

I can synchronize with the USB cable.
I can synchronize with Bluetooth my old Nokia and use my headset.

What is strange that the Phone shows up as a network access point on the
Bluetooth app on my Dell.
In any case, I tried a lot and my phone doesn't synchronize with the PC.
When I delete all bluetooth devices and readd from laptop I'm getting a
message that the phoen refused connection.

Any ideas are welcome!



Posted by Todd Allcock on June 5, 2007, 6:31 pm
Please log in for more thread options
 At 05 Jun 2007 15:07:43 -0500 Frank wrote:

> I got a new T-Mobile Dash and upgraded it to MS Mobile 6.0.
> I have a Dell Latitude D610 with Bluetooth Stack from Toshiba v4.00.20
(D).
>
> I can synchronize with the USB cable.
> I can synchronize with Bluetooth my old Nokia and use my headset.
>
> What is strange that the Phone shows up as a network access point on
the
> Bluetooth app on my Dell.


I assume you paired your Dash to the PC from the PC? WinMo phones need
to do it the other way around- you need to do it from Activesync on the
Dash, and setup the BT partnership from there. Then you can initiate BT
syncs from the device (never the PC!)



Posted by Frank on June 6, 2007, 9:51 am
Please log in for more thread options
Hi,

I deleted all the partnerships again and re-added from the phone. The phone
claims success. However, Is till can't sync.
When I open the ActiveSync on the phone I select: connect with Bluetooth. It
states that there is no partnership. I go through the process and select the
PC that I just added. This is repeats itself.

Do I need to setup a "COM" port? On the laptop side I noticed that the
ActiveSync doesn't have Bluetooth listed as a device. Just USB, COM's, DMA,
IR.


Frank

> At 05 Jun 2007 15:07:43 -0500 Frank wrote:
>
>> I got a new T-Mobile Dash and upgraded it to MS Mobile 6.0.
>> I have a Dell Latitude D610 with Bluetooth Stack from Toshiba v4.00.20
> (D).
>>
>> I can synchronize with the USB cable.
>> I can synchronize with Bluetooth my old Nokia and use my headset.
>>
>> What is strange that the Phone shows up as a network access point on
> the
>> Bluetooth app on my Dell.
>
>
> I assume you paired your Dash to the PC from the PC? WinMo phones need
> to do it the other way around- you need to do it from Activesync on the
> Dash, and setup the BT partnership from there. Then you can initiate BT
> syncs from the device (never the PC!)
>
>



Posted by Todd Allcock on June 6, 2007, 11:26 am
Please log in for more thread options
At 06 Jun 2007 08:51:57 -0500 Frank wrote:

> I deleted all the partnerships again and re-added from the phone. The
phone
> claims success. However, Is till can't sync.
> When I open the ActiveSync on the phone I select: connect with Bluetooth.
It
> states that there is no partnership. I go through the process and
select the
> PC that I just added. This is repeats itself.
>
> Do I need to setup a "COM" port? On the laptop side I noticed that the
> ActiveSync doesn't have Bluetooth listed as a device. Just USB, COM's,
DMA,
> IR.


Oooops. Sorrry- forgot about that! Yes- you need to tell activesync on
the PC to use whatever COM port your PC's BT adapter uses.



Posted by Frank on June 6, 2007, 11:56 am
Please log in for more thread options
That seems to be the problem. Don't know how to to this. My Toshiba
Bluetooth stack seems to recognize it as a "network access point" not as a
COM port. There doens't seem to be a manual mode to have it recognized as a
COM port.
I can add COM ports in the Bluetooth COM port seetings under the control
panel. However, I can't assign anthing.
Not sure how to to this.

> At 06 Jun 2007 08:51:57 -0500 Frank wrote:
>
>> I deleted all the partnerships again and re-added from the phone. The
> phone
>> claims success. However, Is till can't sync.
>> When I open the ActiveSync on the phone I select: connect with Bluetooth.
> It
>> states that there is no partnership. I go through the process and
> select the
>> PC that I just added. This is repeats itself.
>>
>> Do I need to setup a "COM" port? On the laptop side I noticed that the
>> ActiveSync doesn't have Bluetooth listed as a device. Just USB, COM's,
> DMA,
>> IR.
>
>
> Oooops. Sorrry- forgot about that! Yes- you need to tell activesync on
> the PC to use whatever COM port your PC's BT adapter uses.
>
>



Similar ThreadsPosted
Synchronize Subfolders with WM5 Active Sync (over UMTS) May 2, 2007, 4:33 am
ActiveSync Service Provider can not synchronize target files to WM5 Emulator. April 5, 2006, 10:33 pm
Setting Up Exchange 2003 to Synchronize with Windows Mobile without a digital certificate April 24, 2007, 7:02 pm
ANN: WM6 & Microsoft Bluetooth A2DP (stereo Bluetooth headphones) quality: Light at the End of the Tunnel? June 5, 2007, 5:54 am
Dash December 27, 2007, 9:52 pm
Bluetooth PAN profile on WM5 PPC with MS Bluetooth stack October 17, 2006, 7:57 am
T-mobile Dash March 9, 2007, 8:25 pm
WM6, Dash, How to config VPN? January 17, 2008, 2:00 pm
Dash alarm won't shut up! December 17, 2006, 11:47 am
Outlook on T-Mobile Dash December 20, 2006, 10:53 pm

Our other projects:

Art Dolls, Fairies and Mermaids - Sunnyfaces.net

Roy's Linux, Programming and Search Engines messages

1-Script XML SitemapXML Sitemap