Click here to get back home

Module install problem - AppConfig
 Home | NewsGroups | Search | About
Login Password
Register Now!
 comp.lang.perl.modules    Post an article   get this group's latest topics as an RSS feed add this group's latest topics to your My MSN content add this group's latest topics to your My Yahoo content
Subject Author Date
Module install problem - AppConfig JLR 10-19-2005
Posted by JLR on October 19, 2005, 2:04 pm
Please log in for more thread options

My original intent was to install the "Template-Toolkit-2.14.tar.gz"
but it complained that it needed "AppConfig-1.56.tar.gz"
so I down loaded that and attempted to install.
The following is the result with lots of bad tests!!!
Is this fixable and how?
Is there a PPM package for "AppConfig-1.56.tar.gz" and/or
"Template-Toolkit-2.14.tar.gz"

perl, v5.8.7 built for MSWin32-x86-multi-thread
Running on Windows XP Pro.

I could not get perl make to work so I tried Microsoft "nmake".
Should I use some other "make" application?

--
C:\Perl\ac\APPCON~1.56>perl Makefile.pl
Checking if your kit is complete...
Looks good
Writing Makefile for AppConfig

C:\Perl\ac\APPCON~1.56>nmake

Microsoft (R) Program Maintenance Utility Version 1.50
Copyright (c) Microsoft Corp 1988-94. All rights reserved.

cp lib/AppConfig/Args.pm blib\lib\AppConfig\Args.pm
cp lib/AppConfig/CGI.pm blib\lib\AppConfig\CGI.pm
cp lib/AppConfig/File.pm blib\lib\AppConfig\File.pm
cp lib/AppConfig.pm blib\lib\AppConfig.pm
cp lib/AppConfig/Getopt.pm blib\lib\AppConfig\Getopt.pm
cp lib/AppConfig/State.pm blib\lib\AppConfig\State.pm
cp lib/AppConfig/Sys.pm blib\lib\AppConfig\Sys.pm

C:\Perl\ac\APPCON~1.56>nmake test

Microsoft (R) Program Maintenance Utility Version 1.50
Copyright (c) Microsoft Corp 1988-94. All rights reserved.

C:\Perl\bin\perl.exe "-MExtUtils::Command::MM" "-e" "test_harness(0,
'bl
ib\lib', 'blib\arch')" t\appconfig.t t\args.t t\block.t t\cgi.t t\compact.t
t\co
nst.t t\default.t t\file.t t\flag.t t\getopt.t t\multi.t t\novars.t
t\state.t t\
sys.t
t\appconfig....ok
t\args.........ok
t\block........ok
t\cgi..........ok
t\compact......ok
t\const........ok
t\default......ok
t\file.........ok 1/43Usage: POSIX::getpwuid(uid) at lib/AppConfig/File.pm
line
410
# Looks like you planned 43 tests but only ran 3.
# Looks like your test died just after 3.
t\file.........dubious
Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 4-43
Failed 40/43 tests, 6.98% okay
t\flag.........ok
t\getopt.......ok
t\multi........ok
t\novars.......ok
t\state........ok
t\sys..........ok
Failed Test Stat Wstat Total Fail Failed List of Failed
----------------------------------------------------------------------------
---
t\file.t 255 65280 43 80 186.05% 4-43
Failed 1/14 test scripts, 92.86% okay. 40/253 subtests failed, 84.19% okay.
NMAKE : fatal error U1077: 'C:\WINDOWS\system32\cmd.exe' : return code
'0xff'
Stop.

C:\Perl\ac\APPCON~1.56>
------------- JLR ----------------------
garbage jraff a t comcast d o t net garbage
Remove garbage and reformat to send mail




Posted by Randy Kobes on October 20, 2005, 8:52 am
Please log in for more thread options

JLR wrote:
> My original intent was to install the "Template-Toolkit-2.14.tar.gz"
> but it complained that it needed "AppConfig-1.56.tar.gz"
> so I down loaded that and attempted to install.
> The following is the result with lots of bad tests!!!
> Is this fixable and how?
> Is there a PPM package for "AppConfig-1.56.tar.gz" and/or
> "Template-Toolkit-2.14.tar.gz"

As Ron mentioned in another reply, it is possible to
build the module using Microsoft's nmake, but if you'd
rather use a ppm package, we have one for both AppConfig
and Template-Toolkit at
http://theoryx5.uwinnipeg.ca/ppms/

--
best regards,
randy kobes


Posted by JLR on October 21, 2005, 1:44 pm
Please log in for more thread options


Thanks!

ppm downloaded it from Uwinnipeg.
I now have some reading to do.

Again - Thanks!





Similar ThreadsPosted
AppConfig September 17, 2006, 11:37 am
only want to install one module and the depended ones, but CPAN always install the whole Perl. September 14, 2007, 5:23 pm
AppConfig: how to reset object? October 1, 2004, 9:20 am
AppConfig failure with ARGCOUNT_LIST May 22, 2007, 10:33 am
RFC: Bridge AppConfig and Config::Model November 22, 2007, 7:33 am
AppConfig loading undef values into ARGCOUNT_LIST March 22, 2007, 2:54 pm
XML-Parser-2.34 install problem on Solaris December 7, 2004, 5:18 pm
XML::Parser::Expat install problem April 24, 2005, 1:44 am
cgi.pm install problem on windows 2000 March 2, 2006, 4:51 pm
libwww-perl-5.805 install problem on OS X 10.3 March 13, 2006, 10:12 pm

Our other projects:

Art Dolls, Fairies and Mermaids - Sunnyfaces.net

Roy's Linux, Programming and Search Engines messages

1-Script XML SitemapXML Sitemap