|
Posted by Dave on February 28, 2006, 4:28 pm
Please log in for more thread options
Hi Brano
I don't know nearly as much as you do about computers, but I am having a
similar problem. My live T V signal freezes up in Media Center.
I used to have a WinTV tv tuner in my old computer and it ran just fine with
same cable connection I have now.
I have not been able to find any answers yet in my research. I have
downloaded a couple of updates from Microsoft to no avail.
Good luck
"Brano" wrote:
> Hi all,
>
> I have jsut build a MCE PC and installed it and everything works fine but
> when I watch Live / Recorded TV the video intermitenly skips there really is
> no pattern to it. It happens on all channels and even on recorded TV.
>
> However if I am watching DVD or DivX or any other video that I didnt record
> myself it works fine no skipping.
>
> I have all the latest updates on it including the Rolout 2
>
> and My TV card is Haupage 1500 DVB-T with the latest drivers
>
> and My Graphics card is HIS Excalibur 9250 Radeon 128mb with the latest
> Radeon driver from ATI website
>
> I am also using PowerDVD 6 as MPEG decoder
>
> ( i have tried WinDVD 5 and WinDVD7 both had the same problem)
> ( i have installed the Microsoft Hotfix KB896256 that is supposed to sort
> this out on a HT CPU - didnt help)
>
> Full PC configuration
>
> Intel P4 Socket 478 3.2 ghz Hyper Threading
> GIGABYTE GA-8IG1000MK skt 478 intel 865PE 800 FSB
> HIS Excalibur ATI Radeon 9250SE 128MB DDR TV-Out/DVI (AGP) - Retail
> (R9250-TDW128-64bit)
> Hauppauge WinTV HVR-1300 Media Centre Edition Freeview TV Tuner
> Trust 7.1 sound
> 2 x 512 Mb Kingston PC3200 DDR RAM
> HP DVD-RW drive
> 200 GB IDE Maxtor HDD
> Enligh Media Center Case
>
> Can any one help?
> --
> Intel P4 3.2 ghz Hyper Threading
> GIGABYTE GA-8IG1000MK intel 865PE
> HIS Excalibur ATI Radeon 9250SE 128MB DDR TV-Out/DVI (AGP)Hauppauge WinTV
> HVR-1300 Media Centre Edition Freeview TV Tuner
>
| 
XML Sitemap