|
Posted by BillW50 on January 3, 2008, 10:03 am
Please log in for more thread options
In
kritzner @/bei logicway ./punkt de typed on Thu, 3 Jan 2008
06:52:11 -0800 (PST):
>> Sounds like you need to visit the BIOS Setup and setup the device
>> boot order to me. When you turn on the laptop and watch the screen,
>> it will tell you what key(s) to hit to enter the Setup. If Windows
>> starts loading, you missed that option. If you computer shows a
>> graphic instead of text when booting up, try tapping the ESC key to
>> switch it to text.
>
> Thanks for your answer, but the boot order is ok. The sequence is CD
> before HDD. With the original HDD it boots from CD. But the error
> occurs directly before CD boot should start.
>
> Arndt
What error? Anyway it sounds like maybe the jumper on the HD is set in
the wrong position (master/slave/cable select). Hard to say which is the
right position. Maybe you can check what the old one was set at.
--
Bill
email: change kom to com
| 
XML Sitemap