|
Posted by Peter Makholm on October 26, 2007, 9:33 am
Please log in for more thread options
>>
>> [snip]
>>
>> > if I print "$1\n",
>> > the file prints just fine. But, if I do something like print "$1 after
>> > \n", the whole output is messed up. If I print "before $1\n", nothing
>> > prints at all. If I print "before $1 after\n", only after prints.
>>
>> not really sure, but could be a rogue "\r" in $1,
> There
> is a rogue carriage return (0xd) in the string
> Is there something I can do to deal with this
> situation?
Repair the corrupted file:
perl -p -i -e 'tr/\r//d' bad_file
--
Tad McClellan SGML consulting
tadmc@augustmail.com Perl programming
Fort Worth, Texas
|
|
Posted by comp.llang.perl.moderated on October 26, 2007, 3:35 pm
Please log in for more thread options
>>
>> [snip]
>>
>> > if I print "$1\n",
>> > the file prints just fine. But, if I do something like print "$1 after
>> > \n", the whole output is messed up. If I print "before $1\n", nothing
>> > prints at all. If I print "before $1 after\n", only after prints.
>>
>> not really sure, but could be a rogue "\r" in $1,
> There
> is a rogue carriage return (0xd) in the string
> Is there something I can do to deal with this
> situation?
Repair the corrupted file:
perl -p -i -e 'tr/\r//d' bad_file
--
Tad McClellan SGML consulting
tadmc@augustmail.com Perl programming
Fort Worth, Texas
|
|
Posted by Ben Morrow on October 26, 2007, 4:22 pm
Please log in for more thread options >>
>> [snip]
>>
>> > if I print "$1\n",
>> > the file prints just fine. But, if I do something like print "$1 after
>> > \n", the whole output is messed up. If I print "before $1\n", nothing
>> > prints at all. If I print "before $1 after\n", only after prints.
>>
>> not really sure, but could be a rogue "\r" in $1,
> There
> is a rogue carriage return (0xd) in the string
> Is there something I can do to deal with this
> situation?
Repair the corrupted file:
perl -p -i -e 'tr/\r//d' bad_file
--
Tad McClellan SGML consulting
tadmc@augustmail.com Perl programming
Fort Worth, Texas
|
|
Posted by xhoster on October 26, 2007, 4:47 pm
Please log in for more thread options >>
>> [snip]
>>
>> > if I print "$1\n",
>> > the file prints just fine. But, if I do something like print "$1 after
>> > \n", the whole output is messed up. If I print "before $1\n", nothing
>> > prints at all. If I print "before $1 after\n", only after prints.
>>
>> not really sure, but could be a rogue "\r" in $1,
> There
> is a rogue carriage return (0xd) in the string
> Is there something I can do to deal with this
> situation?
Repair the corrupted file:
perl -p -i -e 'tr/\r//d' bad_file
--
Tad McClellan SGML consulting
tadmc@augustmail.com Perl programming
Fort Worth, Texas
|
|
Posted by Ben Morrow on October 26, 2007, 6:57 pm
Please log in for more thread options >>
>> [snip]
>>
>> > if I print "$1\n",
>> > the file prints just fine. But, if I do something like print "$1 after
>> > \n", the whole output is messed up. If I print "before $1\n", nothing
>> > prints at all. If I print "before $1 after\n", only after prints.
>>
>> not really sure, but could be a rogue "\r" in $1,
> There
> is a rogue carriage return (0xd) in the string
> Is there something I can do to deal with this
> situation?
Repair the corrupted file:
perl -p -i -e 'tr/\r//d' bad_file
--
Tad McClellan SGML consulting
tadmc@augustmail.com Perl programming
Fort Worth, Texas
|
| Similar Threads | Posted | | Scary IPC::Open3 filehandle difference | October 28, 2004, 1:23 am |
| IPC::Open3 | August 24, 2005, 2:23 pm |
| IPC::Open3 | November 11, 2006, 8:10 pm |
| How do you use IPC::Open3.... | January 19, 2008, 5:11 pm |
| open3 and signals | September 20, 2004, 8:43 pm |
| IPC::Open3 issue | August 24, 2005, 3:21 pm |
| can't get STDERR using open3... | December 20, 2006, 3:21 pm |
| IPC::open3: What goes wrong? | August 1, 2007, 1:05 pm |
| Example for open3 on windows? | May 20, 2008, 1:33 am |
| Open3 with nonblocking reads | September 3, 2004, 7:51 am |
|
XML Sitemap