Click here to get back home

High sound when going to Stand By
 Home | NewsGroups | Search | About
Login Password
Register Now!
 microsoft.public.windows.mediacenter    Post an article   get this group's latest topics as an RSS feed add this group's latest topics to your My MSN content add this group's latest topics to your My Yahoo content
Subject Author Date
High sound when going to Stand By Nikolaj 11-12-2005
Get Chitika Premium
Posted by Nikolaj on November 12, 2005, 6:05 am
Please log in for more thread options
 When I put my MCE 2005 PC into stand by, I get a very high sound just before
it shuts down. Hard to describe but sounds most of all like when you pull a
cat's tale.
My system connects from an onboard chip via the analog cables to a Creative
MegaWorks 5.1 system with a cable remote. The speaker's volume setting is
almost turned to maximum, in order to control the volume from MCE 2005 via
the remote.
Any suggestions on how to get rid of this sound?

--
Best regards,

Nikolaj Johansen
WMP: 10.00.00.3802
Windows XP Pro ver. 2002 SP2


Posted by Michael J. Mahon on November 12, 2005, 12:58 pm
Please log in for more thread options
 Nikolaj wrote:
> When I put my MCE 2005 PC into stand by, I get a very high sound just before
> it shuts down. Hard to describe but sounds most of all like when you pull a
> cat's tale.
> My system connects from an onboard chip via the analog cables to a Creative
> MegaWorks 5.1 system with a cable remote. The speaker's volume setting is
> almost turned to maximum, in order to control the volume from MCE 2005 via
> the remote.
> Any suggestions on how to get rid of this sound?

Try moving the cat a little further from the power switch. ;-)

(Sorry, couldn't help myself. ;-)

-michael

Music synthesis for 8-bit Apple II's!
Home page: http://members.aol.com/MJMahon/

"The wastebasket is our most important design
tool--and it is seriously underused."


Posted by Andy Vanosdale [MCE MVP] on November 12, 2005, 4:28 pm
Please log in for more thread options
Hi Nikolaj,

Usually, there are not a lot of solutions for this issue. What I do is turn
the speakers down when I put into standby. Thanks!

--
Andy Vanosdale
Microsoft MVP - Windows XP Media Center Edition
Microsoft Student Ambassador - University of Tennessee at Chattanooga
My Blog - http://blog.vanosdale.com
Expert Zone - http://www.microsoft.com/WindowsXP/ExpertZone

> When I put my MCE 2005 PC into stand by, I get a very high sound just
> before
> it shuts down. Hard to describe but sounds most of all like when you pull
> a
> cat's tale.
> My system connects from an onboard chip via the analog cables to a
> Creative
> MegaWorks 5.1 system with a cable remote. The speaker's volume setting is
> almost turned to maximum, in order to control the volume from MCE 2005 via
> the remote.
> Any suggestions on how to get rid of this sound?
>
> --
> Best regards,
>
> Nikolaj Johansen
> WMP: 10.00.00.3802
> Windows XP Pro ver. 2002 SP2




Similar ThreadsPosted
MCE 2005 and high range sound cards September 28, 2005, 5:39 pm
High pitched sound from speakers when in standby March 22, 2007, 11:02 am
tv after stand-by September 22, 2005, 1:55 am
stand by October 9, 2006, 10:07 pm
Stand by mode December 6, 2005, 5:08 pm
Stand-by mode February 16, 2006, 6:42 am
MC won't stay on Stand By October 13, 2006, 2:13 pm
XP MCE stand by problem July 27, 2007, 3:55 am
Are there any stand alone extenders? June 10, 2008, 2:35 pm
Stand By Problem September 9, 2008, 1:00 pm

Our other projects:

Art Dolls, Fairies and Mermaids - Sunnyfaces.net

Roy's Linux, Programming and Search Engines messages

1-Script XML SitemapXML Sitemap