|
Posted by Chris De Herrera on November 15, 2005, 3:02 pm
Please log in for more thread options
Hi,
What device did this solution work with?
--
Chris De Herrera
http://www.pocketpcfaq.com
http://www.tabletpctalk.com
http://www.pocketpctalk.com
http://www.mobilitytalk.com
> In order to propogate information.. I just want to post my solution to
> the problem that I found on a Hewlett Packard Forum:
>
> Problem:
> Coming out of hibernation, ActiveSync no longer works and reports the
> COM Port is no longer available.
>
> Possible Solution:
> To prevent this issue you should disable the power management for the
> USB Root Hub. To do so:
> Click Start, Control Panel and then System.
> Click System and click the Hardware tab in the System Properties window
> that appears.
> Click the Device Manager button, then double-click Universal Serial Bus
> controllers.
> In the list select each USB Root Hub and click the Properties button.
> Select the Power Management tab.
> Remove the checkmark in front of the box marked Allow the computer to
> turn off this device to save power.
> Click OK, then close the Device Manager by clicking the red cross on
> the top right of the window.
> Click OK and you will be back in the Control Panel.
> Note: If the system goes into hibernation or standby mode the
> ActiveSync connection will be severed. This is regular behaviour.
>
| 
XML Sitemap