|
Posted by epurman on August 8, 2008, 10:09 am
Please log in for more thread options
If I understand, you get the application running properly on your PC with an
HDMI input. Is the application running when hooked on to your Phillps HD.
You should be getting an HD signal with your Hauppage product.
Is your problem when you switch to the TV input or turn on a channel, then
your application does not work. If that is the issue I don't think that it
is a problem. Your TV input will not work with a PC application. It would
need it own input like a coaxial (if the TV has a QAM signal) or an antenna
coaxial; if it is an ATSC receiver.
If you are running your cable/antenna/HD input into Hauppage, you need to
buy a splitter from Radio Shack; and get a coaxial from the splitter into
your TV input in order to get your TV running properly
--
epurman
"samadams_2006@yahoo.ca" wrote:
> Hello,
>
> I have the Haupppauge WinTV-HVR950 TV Tuner Product, and can receive
> tv shows on my PC (running Vista) with no problems. I've tried both
> their software product and Microsoft Media Center. The problem comes
> when I try to display this image on my HDTV, which is a Phillips 52"
> HDTV with FullHD 1080p. I'm using an HDMI cable, and the TV just
> shows "NO VIDEO SIGNAL" no matter what I do.
>
> Do I need to install something else to get this signal to display on
> my HDTV, or adjust some Vista Setting? How should I proceed to get
> this to work?
>
> Thanks
>
> RE: Hauppauge WinTV-HVR950 TV TUNER - "NO VIDEO SIGNAL"
>
| 
XML Sitemap