|
Posted by btna on February 8, 2005, 8:12 am
Please log in for more thread options
Hi all,
I am trying to get all my pre-requisies to install Net::SSH on an AIX
server and the last Math module I need is Mat::Pari. I downloaded
"pari-2.1.6" and di the following:
../Configure
make gp
make install
I noticed it wrote to /usr/local/lib/pari. Now, I did not get any error
messages so I don't know if I am missing something or not.
Then, I went back to Mat::Pari directory and do:
$>perl Makefile.PL
Setting up Math::Pari with Perl 5.006 on aix version 5.0.0.0;
cc=cc, gccversion=, ccflags='-D_ALL_SOURCE -D_ANSI_C_SOURCE
-D_POSIX_SOURCE -
qmaxmem=16384 -q32 -D_LARGE_FILES -qlonglong',
ld=ld, ldflags='-b32', optimize='-O'.
Found GP/PARI build directory in ./pari-2.1.6
(integer-formatted version 2001006).
....Generating libPARI/paricfg.h ...
Scanning header files...
....ulong
....getrusage
....CLK_TCK not defined
Creating libPARI/paricfg.h...
....Processor of family `aix' detected
Problems with numeric interface codes noted:
May be harmless: non-unique string interfaces for numeric interfaces:
29 meaning "GGp GG GGD0,L,p"
(appears for agm, besseljh, bnrconductorofchar, ellheightmatrix,
ellordina
te, ellpointtoz, ellztopoint, idealprimedec, ideleprincipal, incgamc,
qfbprimefo
rm, rnfconductor, rnfinit, rnfpolred, theta)
Possible problems with Math::Pari interface to GP/PARI:
unexpected value of string interfaces for numeric interfaces:
29 meaning "GGp GG GGD0,L,p" (was meaning "GGp" in 2.1.3)
(may affect functions idealprimedec, rnfconductor)
Checking if your kit is complete...
Looks good
....Processor of family `aix' detected
#### Do not know how to build for assembler `aix'. ####
#### Reversing to assembler-less type `port'. ####
#### ####
#### If you think your processor's assembler is supported ####
#### by PARI, edit libPARI/Makefile.PL and report. ####
#### ####
#### Alternatively, specify machine=YOURTYPE on the ####
#### perl Makefile.PL line ####
#### Recognized types: ####
#### alpha hppa m86k none sparcv7 sparcv8 sparcv8_micro ####
#### sparcv8_super ix86 ####
....I will use portable assembler-less build
Writing Makefile for Math::PARI::libPARI
Writing Makefile for Math::Pari
When I do "make", I get: (Note: I temoved some of the "cc" lines to
make this post shorter)
# >make
mkdir blib
mkdir blib/lib
mkdir blib/lib/Math
cp libPARI.pod blib/lib/Math/libPARI.pod
cp PariInit.pm blib/lib/Math/PariInit.pm
cp Pari.pm blib/lib/Math/Pari.pm
cp libPARI.dumb.pod blib/lib/Math/libPARI.dumb.pod
cd libPARI && make LIB="" LIBPERL_A="libperl.a"
LINKTYPE="dynamic" PREFI
X="/usr/opt/perl5" OPTIMIZE="-O"
/usr/bin/perl -pe1 .././pari-2.1.6/src/kernel/none/level0.h
..././pari-2.
1.6/src/kernel/none/level1.h > pariinl.h
cc -c -I.././pari-2.1.6/src/headers -I.././pari-2.1.6/src/graph
-I. -D_A
LL_SOURCE -D_ANSI_C_SOURCE -D_POSIX_SOURCE -qmaxmem=16384 -q32
-D_LARGE_FILES -q
longlong -O -DVERSION="0.10" -DXS_VERSION="0.10"
-Derr=pari_err -DDYN
AMIC_PLOTTING -o alglin2.o .././pari-2.1.6/src/basemath/alglin2.c
cc -c -I.././pari-2.1.6/src/headers -I.././pari-2.1.6/src/graph
-I. -D_A
LL_SOURCE -D_ANSI_C_SOURCE -D_POSIX_SOURCE -qmaxmem=16384 -q32
-D_LARGE_FILES -q
longlong -O -DVERSION="0.10" -DXS_VERSION="0.10"
-Derr=pari_err -DDYN
AMIC_PLOTTING -o ifactor1.o .././pari-2.1.6/src/basemath/ifactor1.c
cc -c -I.././pari-2.1.6/src/headers -I.././pari-2.1.6/src/graph
-I. -D_A
LL_SOURCE -D_ANSI_C_SOURCE -D_POSIX_SOURCE -qmaxmem=16384 -q32
-D_LARGE_FILES -q
longlong -O -DVERSION="0.10" -DXS_VERSION="0.10"
-Derr=pari_err -DDYN
AMIC_PLOTTING -o base2.o .././pari-2.1.6/src/basemath/base2.c
cc -c -I.././pari-2.1.6/src/headers -I.././pari-2.1.6/src/graph
-I. -D_A
LL_SOURCE -D_ANSI_C_SOURCE -D_POSIX_SOURCE -qmaxmem=16384 -q32
-D_LARGE_FILES -q
longlong -O -DVERSION="0.10" -DXS_VERSION="0.10"
-Derr=pari_err -DDYN
AMIC_PLOTTING -o base3.o .././pari-2.1.6/src/basemath/base3.c
cc -c -I.././pari-2.1.6/src/headers -I.././pari-2.1.6/src/graph
-I. -D_A
LL_SOURCE -D_ANSI_C_SOURCE -D_POSIX_SOURCE -qmaxmem=16384 -q32
-D_LARGE_FILES -q
longlong -O -DVERSION="0.10" -DXS_VERSION="0.10"
-Derr=pari_err -DDYN
AMIC_PLOTTING -o plotport.o .././pari-2.1.6/src/graph/plotport.c
cc -c -I.././pari-2.1.6/src/headers -I.././pari-2.1.6/src/graph
-I. -D_A
LL_SOURCE -D_ANSI_C_SOURCE -D_POSIX_SOURCE -qmaxmem=16384 -q32
-D_LARGE_FILES -q
longlong -O -DVERSION="0.10" -DXS_VERSION="0.10"
-Derr=pari_err -DDYN
AMIC_PLOTTING -o buch3.o .././pari-2.1.6/src/basemath/buch3.c
cc -c -I.././pari-2.1.6/src/headers -I.././pari-2.1.6/src/graph
-I. -D_A
LL_SOURCE -D_ANSI_C_SOURCE -D_POSIX_SOURCE -qmaxmem=16384 -q32
-D_LARGE_FILES -q
longlong -O -DVERSION="0.10" -DXS_VERSION="0.10"
-Derr=pari_err -DDYN
AMIC_PLOTTING -o bibli1.o .././pari-2.1.6/src/basemath/bibli1.c
cc -c -I.././pari-2.1.6/src/headers -I.././pari-2.1.6/src/graph
-I. -D_A
LL_SOURCE -D_ANSI_C_SOURCE -D_POSIX_SOURCE -qmaxmem=16384 -q32
-D_LARGE_FILES -q
longlong -O -DVERSION="0.10" -DXS_VERSION="0.10"
-Derr=pari_err -DDYN
AMIC_PLOTTING -o buch4.o .././pari-2.1.6/src/basemath/buch4.c
cc -c -I.././pari-2.1.6/src/headers -I.././pari-2.1.6/src/graph
-I. -D_A
LL_SOURCE -D_ANSI_C_SOURCE -D_POSIX_SOURCE -qmaxmem=16384 -q32
-D_LARGE_FILES -q
longlong -O -DVERSION="0.10" -DXS_VERSION="0.10"
-Derr=pari_err -DDYN
AMIC_PLOTTING -o bibli2.o .././pari-2.1.6/src/basemath/bibli2.c
cc -c -I.././pari-2.1.6/src/headers
-I.././pari-2.1.6/src/graph -I. -D_A
LL_SOURCE -D_ANSI_C_SOURCE -D_POSIX_SOURCE -qmaxmem=16384 -q32
-D_LARGE_FILES -q
longlong -O -DVERSION="0.10" -DXS_VERSION="0.10"
-Derr=pari_err -DDYN
AMIC_PLOTTING -o nffactor.o .././pari-2.1.6/src/modules/nffactor.c
cc -c -I.././pari-2.1.6/src/headers -I.././pari-2.1.6/src/graph
-I. -D_A
LL_SOURCE -D_ANSI_C_SOURCE -D_POSIX_SOURCE -qmaxmem=16384 -q32
-D_LARGE_FILES -q
longlong -O -DVERSION="0.10" -DXS_VERSION="0.10"
-Derr=pari_err -DDYN
AMIC_PLOTTING -o kummer.o .././pari-2.1.6/src/modules/kummer.c
cc -c -I.././pari-2.1.6/src/headers -I.././pari-2.1.6/src/graph
-I. -D_A
LL_SOURCE -D_ANSI_C_SOURCE -D_POSIX_SOURCE -qmaxmem=16384 -q32
-D_LARGE_FILES -q
longlong -O -DVERSION="0.10" -DXS_VERSION="0.10"
-Derr=pari_err -DDYN
AMIC_PLOTTING -o sumiter.o .././pari-2.1.6/src/language/sumiter.c
cc -c -I.././pari-2.1.6/src/headers -I.././pari-2.1.6/src/graph
-I. -D_A
LL_SOURCE -D_ANSI_C_SOURCE -D_POSIX_SOURCE -qmaxmem=16384 -q32
-D_LARGE_FILES -q
longlong -O -DVERSION="0.10" -DXS_VERSION="0.10"
-Derr=pari_err -DDYN
AMIC_PLOTTING -o plotgnuplot.o .././pari-2.1.6/src/graph/plotgnuplot.c
cc -c -I.././pari-2.1.6/src/headers -I.././pari-2.1.6/src/graph
-I. -D_A
LL_SOURCE -D_ANSI_C_SOURCE -D_POSIX_SOURCE -qmaxmem=16384 -q32
-D_LARGE_FILES -q
longlong -O -DVERSION="0.10" -DXS_VERSION="0.10"
-Derr=pari_err -DDYN
AMIC_PLOTTING -o elliptic.o .././pari-2.1.6/src/modules/elliptic.c
cc -c -I.././pari-2.1.6/src/headers -I.././pari-2.1.6/src/graph
-I. -D_A
LL_SOURCE -D_ANSI_C_SOURCE -D_POSIX_SOURCE -qmaxmem=16384 -q32
-D_LARGE_FILES -q
longlong -O -DVERSION="0.10" -DXS_VERSION="0.10"
-Derr=pari_err -DDYN
AMIC_PLOTTING -o subfield.o .././pari-2.1.6/src/modules/subfield.c
cc -c -I.././pari-2.1.6/src/headers -I.././pari-2.1.6/src/graph
-I. -D_A
LL_SOURCE -D_ANSI_C_SOURCE -D_POSIX_SOURCE -qmaxmem=16384 -q32
-D_LARGE_FILES -q
longlong -O -DVERSION="0.10" -DXS_VERSION="0.10"
-Derr=pari_err -DDYN
AMIC_PLOTTING -o alglin1.o .././pari-2.1.6/src/basemath/alglin1.c
cc -c -I.././pari-2.1.6/src/headers -I.././pari-2.1.6/src/graph
-I. -D_A
LL_SOURCE -D_ANSI_C_SOURCE -D_POSIX_SOURCE -qmaxmem=16384 -q32
-D_LARGE_FILES -q
longlong -O -DVERSION="0.10" -DXS_VERSION="0.10"
-Derr=pari_err -DDYN
AMIC_PLOTTING -o kernel.o .././pari-2.1.6/src/kernel/none/level0.c
cc -c -I.././pari-2.1.6/src/headers -I.././pari-2.1.6/src/graph
-I. -D_A
LL_SOURCE -D_ANSI_C_SOURCE -D_POSIX_SOURCE -qmaxmem=16384 -q32
-D_LARGE_FILES -q
longlong -O -DVERSION="0.10" -DXS_VERSION="0.10"
-Derr=pari_err -DDYN
AMIC_PLOTTING -o mp.o .././pari-2.1.6/src/kernel/none/mp.c
cc -c -I.././pari-2.1.6/src/headers -I.././pari-2.1.6/src/graph
-I. -D_A
LL_SOURCE -D_ANSI_C_SOURCE -D_POSIX_SOURCE -qmaxmem=16384 -q32
-D_LARGE_FILES -q
longlong -O -DVERSION="0.10" -DXS_VERSION="0.10"
-Derr=pari_err -DDYN
AMIC_PLOTTING -o mpinl.o .././pari-2.1.6/src/kernel/none/level1.c
rm -f libPARI.a
ar cr libPARI.a alglin2.o gen1.o thue.o galois.o highlvl.o
subgroup.o g
en2.o gen3.o mpqs.o galconj.o trans1.o trans2.o compat.o trans3.o
base1.o ifacto
r1.o base2.o base3.o plotport.o base4.o base5.o buch1.o buch2.o buch3.o
bibli1.o
buch4.o bibli2.o helpmsg.o init.o es.o rootpol.o anal.o errmsg.o
polarit1.o pol
arit2.o polarit3.o stark.o arith1.o arith2.o nffactor.o kummer.o
sumiter.o plotg
nuplot.o elliptic.o subfield.o alglin1.o kernel.o mp.o mpinl.o
: libPARI.a
Target "makemakerdflt" is up to date.
/usr/bin/perl "-I/usr/opt/perl5/lib/5.6.0/aix"
"-I/usr/opt/perl5/lib/5.6
..0" -e 'use ExtUtils::Mksymlists; Mksymlists("NAME" => "Math::Pari",
"DL_FUNCS"
=> { }, "FUNCLIST" => [], "DL_VARS" => []);'
/usr/bin/perl -I/usr/opt/perl5/lib/5.6.0/aix
-I/usr/opt/perl5/lib/5.6.0
/usr/opt/perl5/lib/5.6.0/ExtUtils/xsubpp -typemap
/usr/opt/perl5/lib/5.6.0/ExtU
tils/typemap -typemap typemap Pari.xs > Pari.xsc && mv Pari.xsc Pari.c
cc -c -I./pari-2.1.6/src/headers -I./pari-2.1.6/src -I./libPARI
-D_ALL_S
OURCE -D_ANSI_C_SOURCE -D_POSIX_SOURCE -qmaxmem=16384 -q32
-D_LARGE_FILES -qlong
long -O -DVERSION="2.010603" -DXS_VERSION="2.010603"
-I/usr/opt/perl5
/lib/5.6.0/aix/CORE -DPARI_VERSION_EXP=2001006 -DDEBUG_PARI
-DLSB_in_U32=3 -Derr
=pari_err Pari.c
"Pari.xs", line 911.5: 1506-010 (W) Macro setSVpari_or_do invoked with
a null ar
gument for parameter action.
"Pari.xs", line 911.5: 1506-010 (W) Macro morphSVpari invoked with a
null argume
nt for parameter action.
"Pari.xs", line 952.3: 1506-010 (W) Macro setSVpari_or_do invoked with
a null ar
gument for parameter action.
"Pari.xs", line 952.3: 1506-010 (W) Macro morphSVpari invoked with a
null argume
nt for parameter action.
mkdir blib/arch
mkdir blib/arch/auto
mkdir blib/arch/auto/Math
mkdir blib/arch/auto/Math/Pari
Running Mkbootstrap for Math::Pari ()
chmod 644 Pari.bs
LD_RUN_PATH="/lib" ld -o blib/arch/auto/Math/Pari/Pari.so
-bhalt:4 -bM:
SRE -bI:/usr/opt/perl5/lib/5.6.0/aix/CORE/perl.exp -bE:Pari.exp -b
noentry -lC -
lc Pari.o libPARI/libPARI.a -lm
ld: 0711-317 ERROR: Undefined symbol: .PERL_UNUSED_VAR
ld: 0711-345 Use the -bloadmap or -bnoquiet option to obtain more
information.
make: 1254-004 The error code from the last command is 8.
Stop.
$ >
Any ideas what I am missing?
Thanks in advance,
BTNA
|
|
Posted by Roy Stilling on March 1, 2005, 4:08 am
Please log in for more thread options
> lc Pari.o libPARI/libPARI.a -lm
> ld: 0711-317 ERROR: Undefined symbol: .PERL_UNUSED_VAR
> ld: 0711-345 Use the -bloadmap or -bnoquiet option to obtain more
> information.
> make: 1254-004 The error code from the last command is 8.
I had a similar error compiling this module on Red Hat. I found a
posting on the pari-dev mailing list archives on the PARI/GP site
which suggested adding the following lines to Pari.xs
#ifndef PERL_UNUSED_VAR
# define PERL_UNUSED_VAR(var) if (0) var = var
#endif
This fixed the problem for me. Good luck.
--
Roy Stilling
Senior Web Developer
________________________________________________________________________
http://www.akqa.com
AKQA, Princes House, 38 Jermyn Street, St James's, London, SW1Y 6DN,
UK.
|
| Similar Threads | Posted | | "Undefined subroutine" | November 21, 2004, 8:48 pm |
| GD-1.38: Undefined symbol: .__fixsfsi | July 12, 2004, 10:43 am |
| undefined symbol: gdImageCreateFromGif | June 14, 2007, 1:00 pm |
| HTTP::Response decoded_content is undefined | March 28, 2007, 8:04 am |
| LibXML "Undefined namespace prefix" | July 2, 2007, 5:42 pm |
| Can't call method on an undefined value at | June 27, 2005, 2:56 pm |
|
XML Sitemap