|
Posted by Xevo on October 29, 2004, 3:50 pm
Please log in for more thread options
I've been trying to install GD.pm for a few days now, but to no avail.
I am using Fedora Core 2 with a P4 system.
I have installed libgd 2.0.28, Free Type 2.1.9, libpng 1.2.7, and
jpeg-6b. All were installed from source. I gave each it's own
directory under /usr/local/. There were no errors during the install
of any of them. I can use the scripts that get put into the bin
directory by libgd (such as webpng) so I know libgd is working.
My problem arrises when installing GD.pm. I am attempting to install
GD.pm 2.16. I am using the following args with Makefile.PL, although I
have tried many other variations (such as without "/lib" at the end of
the paths):
perl Makefile.PL -lib_gd_path /usr/local/gd/lib -lib_png_path
/usr/local/libpng/lib -lib_jpeg_path /usr/local/jpeg/lib -lib_ft_path
/usr/local/freetype2/lib -options "GD_JPEG,GD_FREETYPE,GD_PNG,GD_GIF"
--------------------------------------------------
This gives me the following output:
Configuring for libgd version 2.0.28.
Included Features: GD_JPEG,GD_FREETYPE,GD_PNG,GD_GIF
GD library used from: /usr/local/gd/lib
FreeType library used from: /usr/local/freetype2/lib
PNG library used from: /usr/local/libpng/lib
JPEG library used from: /usr/local/jpeg/lib
If you experience compile problems, please check the @INC, @LIBPATH
and @LIBS
arrays defined in Makefile.PL and manually adjust, if necessary.
Writing Makefile for GD
--------------------------------------------------
Ok, so far so good! I then run make...
--------------------------------------------------
gcc -c -I/usr/local/jpeg/lib/include -I/usr/local/libpng/lib/include
-I/usr/local/freetype2/lib/include -I/usr/local/include -D_REENTRANT
-D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing
-I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64
-I/usr/include/gdbm -O2 -g -pipe -march=i386 -mcpu=i686
-DVERSION="2.16" -DXS_VERSION="2.16" -fPIC
"-I/usr/lib/perl5/5.8.3/i386-linux-thread-multi/CORE" -DHAVE_JPEG
-DHAVE_FT -DHAVE_GIF GD.c
Running Mkbootstrap for GD ()
chmod 644 GD.bs
rm -f blib/arch/auto/GD/GD.so
gcc -shared -L/usr/local/lib GD.o -o blib/arch/auto/GD/GD.so
-L/usr/local/freetype2/lib -L/usr/local/libpng/lib
-L/usr/local/jpeg/lib -L/usr/local/lib -ljpeg -lfreetype -lpng -lz -lm
-lgd
chmod 755 blib/arch/auto/GD/GD.so
cp GD.bs blib/arch/auto/GD/GD.bs
chmod 644 blib/arch/auto/GD/GD.bs
Manifying blib/man3/GD::Polyline.3pm
Manifying blib/man3/GD.3pm
--------------------------------------------------
Still no problems that I can see. However, make test blows up...
--------------------------------------------------
PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e"
"test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/GD..........Can't load './blib/arch/auto/GD/GD.so' for module GD:
[libgd.so.2: cannot open shared object file: No such file or directory
at /usr/lib/perl5/5.8.3/i386-linux-thread-multi/DynaLoader.pm line
229.
] at t/GD.t line 13
Compilation failed in require at t/GD.t line 13.
BEGIN failed--compilation aborted at t/GD.t line 13.
t/GD..........dubious
Test returned status 255 (wstat 65280, 0xff00)
Scalar found where operator expected at (eval 152) line 1, near "'int'
$__val"
(Missing operator before $__val?)
DIED. FAILED tests 1-10
Failed 10/10 tests, 0.00% okay
t/Polyline....Can't load
'/home/x3v0/gt/install/GD-2.16/blib/arch/auto/GD/GD.so' for module GD:
[libgd.so.2: cannot open shared object file: No such file or directory
at /usr/lib/perl5/5.8.3/i386-linux-thread-multi/DynaLoader.pm line
229.
] at /home/x3v0/gt/install/GD-2.16/blib/lib/GD/Polyline.pm line 49
Compilation failed in require at
/home/x3v0/gt/install/GD-2.16/blib/lib/GD/Polyline.pm line 49.
BEGIN failed--compilation aborted at
/home/x3v0/gt/install/GD-2.16/blib/lib/GD/Polyline.pm line 49.
Compilation failed in require at t/Polyline.t line 10.
BEGIN failed--compilation aborted at t/Polyline.t line 10.
t/Polyline....dubious
Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED test 1
Failed 1/1 tests, 0.00% okay
Failed Test Stat Wstat Total Fail Failed List of Failed
-------------------------------------------------------------------------------
t/GD.t 255 65280 10 19 190.00% 1-10
t/Polyline.t 255 65280 1 2 200.00% 1
Failed 2/2 test scripts, 0.00% okay. 11/11 subtests failed, 0.00%
okay.
make: *** [test_dynamic] Error 255
--------------------------------------------------
I'm not sure exactly what is wrong, but it looks like it can't find
libgd.so.2. Any ideas on what is going on and how to fix this error?
Thanks,
Xev
|
| Similar Threads | Posted | | more gcc woes attempting to install Bit-Vector | February 7, 2005, 2:06 pm |
| Net::IRC Woes | February 17, 2005, 12:02 pm |
| Woes installing HTML::Parser using -MCPAN or by hand | September 3, 2005, 2:11 am |
| only want to install one module and the depended ones, but CPAN always install the whole Perl. | September 14, 2007, 5:23 pm |
| Can not Install XML::Parser | September 29, 2004, 5:26 pm |
| How to install PDL::Slatec | October 1, 2004, 2:00 pm |
| How do I install this package using ppm? | September 28, 2005, 2:44 pm |
| Can't install Unicode::Map | February 12, 2005, 7:54 am |
| How can I install the DBI on Solaris | February 24, 2005, 4:16 pm |
| GDBM Install | April 12, 2005, 12:14 pm |
|
XML Sitemap