|
Posted by anthonyv on April 27, 2008, 9:15 pm
Please log in for more thread options
Hello
I have had Exchange 20003 and Active Sync configured correctly and working
for a few years. The server had 1 LAN IP address until now. I am deploying
an iSCSI SAN to store the Exchange Information store and log files. This has
required me to install an additional NIC in the server and add 2 addtional IP
addresses for the iSCSI VLAN. The iSCSI IP addresses are set to NOT
register with DNS. There are a total of 3 IP addresses on the server, 1 IP
for 3 different interfaces.
As soon as I enable either of the 2 new iSCSI IPs active sync stops working.
The device gets error 85010014 and the Exchange Serer Application log shows
Event ID: 3005 Error. Disable the iSCSI network interfaces to that only the
LAN IP is active and everything is fine.
I am running out of disk space and have planned to attach to the iSCSI SAN
this weekend but cannot until I figure out why this is happening. Any help
is greatly appreciated. Thanks...
-anthony
| 
XML Sitemap