|
Posted by Curious on June 26, 2008, 10:19 am
Please log in for more thread options Do these problems also occur when trying to play a DVD?
What resolution is your external monitor and how is it connected VGA,
S-video?
What are your laptop and external monitor resolution settings?
> It will not play video when my external monitor is plugged in, even on my
> 'main' monitor and it fails completely when dragged over to my external
>
> "Curious" wrote:
>
>> Your avermedia software does not play WHAT nicely when you have your
>> external WHAT plugged in?
>> > It does work in the AVer software, wholly and completely (save not
>> > having
>> > OTA
>> > because I live in a valley), but it does not work in WMC. The only
>> > reason
>> > I
>> > care is that the AVer software does not play nicely when I have my
>> > external
>> > plugged in and WMC does.
>> >
>> > "jolt" wrote:
>> >
>> >> Your tuner does not have hardware MPEG 2 and requires a software
>> >> encoder
>> >> for analog tuning. If you have a mess of different codec on your
>> >> system
>> >> that
>> >> may have something to do with your analog encoding not functioning
>> >> properly.
>> >> At the very least the analog tuner should work in Avermedia software,
>> >> if
>> >> it
>> >> doesn't then you may need to remove existing codec packs and reinstall
>> >> the
>> >> avermedia software to get the encoder working.
>> >>
>> >>
>> >>
>> >> > Hello, I know this has been asked a dozen times before so I will
>> >> > point
>> >> > out
>> >> > the following:
>> >> >
>> >> > My driver is up to date, I do have an MPEG-1/2/4 support for analog
>> >> > and
>> >> > 2
>> >> > for digital, and I have every codec known to man, I use CCCP.
>> >> >
>> >> > I am running a Toshiba Satlite U305-s107, dual core, Vista Home
>> >> > Premium,
>> >> > two
>> >> > gigs of ram, and my tuner card is AVer Media- AverTV Hubrid
>> >> > NanoExpress
>> >> > (HC82
>> >> > ATSC).
>> >> >
>> >> > So, it says that I only have an antenna signal, but all I have is a
>> >> > cable
>> >> > plugged in. I have spent the past two hours messing around with WMC
>> >> > trying
>> >> > to
>> >> > get it to understand that I want it to go cable and it refuses to
>> >> > detect
>> >> > the
>> >> > cable connection. Any help would be greatly appreciated, you can
>> >> > have
>> >> > the
>> >> > digital last piece of my birthday cake if you can figure out why it
>> >> > is
>> >> > wonky!
>> >> > ^_^ Thanks in advance!
>> >>
>> >>
>> >>
>>
| 
XML Sitemap