Click here to get back home

Could not install the Dynamic Host Configuration Protocol (DHCP)...

 HomeNewsGroups | Search | About
 microsoft.public.windows.server.security    Post an article   get this group's latest topics as an RSS feed add this group's latest topics to your My MSN content add this group's latest topics to your My Yahoo content
Subject Author Date
Could not install the Dynamic Host Configuration Protocol (DHCP)... Joseph Geretz 08-01-2005
Get Chitika Premium
Posted by Joseph Geretz on August 1, 2005, 9:38 pm
Please log in for more thread options
Windows 2003 Server Enterprise, 5.8 GB available on the system drive - I'm
trying to install DHCP, I get the following error:

Could not install the Dynamic Host Configuration Protocol (DHCP) component
because a file or registry entry is missing.

Nice. Of course, the real information is in the Event Log. Here are all
event log entries generated during the course of the installation attempt
(in chronological order):

If you can help me out with this, I'd really appreciate it!

Thanks,

- Joe Geretz -

Event Type: Information
Event Source: Service Control Manager
Event Category: None
Event ID: 7035
Date: 8/1/2005
Time: 9:28:22 PM
User: INTERNAL\Administrator
Computer: DIMENSION2
Description:
The DHCP Server service was successfully sent a start control.

[OK, so far so good, now all hell breaks lose:]

Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7024
Date: 8/1/2005
Time: 9:28:24 PM
User: N/A
Computer: DIMENSION2
Description:
The DHCP Server service terminated with service-specific error 20013
(0x4E2D).

Event Type: Information
Event Source: Service Control Manager
Event Category: None
Event ID: 7036
Date: 8/1/2005
Time: 9:28:24 PM
User: N/A
Computer: DIMENSION2
Description:
The DHCP Server service entered the stopped state.

Event Type: Error
Event Source: DhcpServer
Event Category: None
Event ID: 1008
Date: 8/1/2005
Time: 9:28:24 PM
User: N/A
Computer: DIMENSION2
Description:
The DHCP service is shutting down due to the following error:
The service has returned a service-specific error code.

Event Type: Error
Event Source: DhcpServer
Event Category: None
Event ID: 1018
Date: 8/1/2005
Time: 9:28:24 PM
User: N/A
Computer: DIMENSION2
Description:
The DHCP service failed to restore the database. The following error
occurred:
An error occurred while accessing the DHCP database. Look at the
DHCP server event log for more information on this error.

Event Type: Error
Event Source: DhcpServer
Event Category: None
Event ID: 1014
Date: 8/1/2005
Time: 9:28:24 PM
User: N/A
Computer: DIMENSION2
Description:
The following problem occurred with the Jet database -1811: Jet database
read or write operations failed. If the computer or database has just been
upgraded, then this message can be safely ignored. If this message appears
frequently, either there is not enough disk space to complete the operation
or the database or backup database may be corrupt. To correct this
problem, either free additional space on your hard disk or restore the
database. After you restore the database, ensure that conflict detection is
enabled in DHCP server properties. For information about restoring the
database, see Help and Support Center. Additional Debug Information:
JetRestore.

Event Type: Error
Event Source: DhcpServer
Event Category: None
Event ID: 1004
Date: 8/1/2005
Time: 9:28:24 PM
User: N/A
Computer: DIMENSION2
Description:
The DHCP service failed to initialize the database. The following error
occurred:
%%65535




Posted by Joseph Geretz on August 1, 2005, 9:51 pm
Please log in for more thread options
I tried http://support.microsoft.com/?kbid=173396.

No relief :-(

Ifyou can help, Thanks!

- Joe Geretz -

> Windows 2003 Server Enterprise, 5.8 GB available on the system drive - I'm
> trying to install DHCP, I get the following error:
>
> Could not install the Dynamic Host Configuration Protocol (DHCP) component
> because a file or registry entry is missing.
>
> Nice. Of course, the real information is in the Event Log. Here are all
> event log entries generated during the course of the installation attempt
> (in chronological order):
>
> If you can help me out with this, I'd really appreciate it!
>
> Thanks,
>
> - Joe Geretz -
>
> Event Type: Information
> Event Source: Service Control Manager
> Event Category: None
> Event ID: 7035
> Date: 8/1/2005
> Time: 9:28:22 PM
> User: INTERNAL\Administrator
> Computer: DIMENSION2
> Description:
> The DHCP Server service was successfully sent a start control.
>
> [OK, so far so good, now all hell breaks lose:]
>
> Event Type: Error
> Event Source: Service Control Manager
> Event Category: None
> Event ID: 7024
> Date: 8/1/2005
> Time: 9:28:24 PM
> User: N/A
> Computer: DIMENSION2
> Description:
> The DHCP Server service terminated with service-specific error 20013
> (0x4E2D).
>
> Event Type: Information
> Event Source: Service Control Manager
> Event Category: None
> Event ID: 7036
> Date: 8/1/2005
> Time: 9:28:24 PM
> User: N/A
> Computer: DIMENSION2
> Description:
> The DHCP Server service entered the stopped state.
>
> Event Type: Error
> Event Source: DhcpServer
> Event Category: None
> Event ID: 1008
> Date: 8/1/2005
> Time: 9:28:24 PM
> User: N/A
> Computer: DIMENSION2
> Description:
> The DHCP service is shutting down due to the following error:
> The service has returned a service-specific error code.
>
> Event Type: Error
> Event Source: DhcpServer
> Event Category: None
> Event ID: 1018
> Date: 8/1/2005
> Time: 9:28:24 PM
> User: N/A
> Computer: DIMENSION2
> Description:
> The DHCP service failed to restore the database. The following error
> occurred:
> An error occurred while accessing the DHCP database. Look at the
> DHCP server event log for more information on this error.
>
> Event Type: Error
> Event Source: DhcpServer
> Event Category: None
> Event ID: 1014
> Date: 8/1/2005
> Time: 9:28:24 PM
> User: N/A
> Computer: DIMENSION2
> Description:
> The following problem occurred with the Jet database -1811: Jet database
> read or write operations failed. If the computer or database has just
> been upgraded, then this message can be safely ignored. If this message
> appears frequently, either there is not enough disk space to complete the
> operation or the database or backup database may be corrupt. To correct
> this problem, either free additional space on your hard disk or restore
> the database. After you restore the database, ensure that conflict
> detection is enabled in DHCP server properties. For information about
> restoring the database, see Help and Support Center. Additional Debug
> Information: JetRestore.
>
> Event Type: Error
> Event Source: DhcpServer
> Event Category: None
> Event ID: 1004
> Date: 8/1/2005
> Time: 9:28:24 PM
> User: N/A
> Computer: DIMENSION2
> Description:
> The DHCP service failed to initialize the database. The following error
> occurred:
> %%65535
>




Posted by Joseph Geretz on August 2, 2005, 12:04 am
Please log in for more thread options
Some are reporting that this has something to do with the SQL Server 2005
April CTP.

http://forums.microsoft.com/msdn/ShowPost.aspx?PostID=59347

I did install this a few weeks ago (although I subsequently uninstalled it)
so this could be the source of my problem. It doesn't look like anyone has
solved this...

:-(

Luckily I have a LinkSys router which I can set as the DHCP Server.

- Joe Geretz -

>I tried http://support.microsoft.com/?kbid=173396.
>
> No relief :-(
>
> Ifyou can help, Thanks!
>
> - Joe Geretz -
>
>> Windows 2003 Server Enterprise, 5.8 GB available on the system drive -
>> I'm trying to install DHCP, I get the following error:
>>
>> Could not install the Dynamic Host Configuration Protocol (DHCP)
>> component because a file or registry entry is missing.
>>
>> Nice. Of course, the real information is in the Event Log. Here are all
>> event log entries generated during the course of the installation attempt
>> (in chronological order):
>>
>> If you can help me out with this, I'd really appreciate it!
>>
>> Thanks,
>>
>> - Joe Geretz -
>>
>> Event Type: Information
>> Event Source: Service Control Manager
>> Event Category: None
>> Event ID: 7035
>> Date: 8/1/2005
>> Time: 9:28:22 PM
>> User: INTERNAL\Administrator
>> Computer: DIMENSION2
>> Description:
>> The DHCP Server service was successfully sent a start control.
>>
>> [OK, so far so good, now all hell breaks lose:]
>>
>> Event Type: Error
>> Event Source: Service Control Manager
>> Event Category: None
>> Event ID: 7024
>> Date: 8/1/2005
>> Time: 9:28:24 PM
>> User: N/A
>> Computer: DIMENSION2
>> Description:
>> The DHCP Server service terminated with service-specific error 20013
>> (0x4E2D).
>>
>> Event Type: Information
>> Event Source: Service Control Manager
>> Event Category: None
>> Event ID: 7036
>> Date: 8/1/2005
>> Time: 9:28:24 PM
>> User: N/A
>> Computer: DIMENSION2
>> Description:
>> The DHCP Server service entered the stopped state.
>>
>> Event Type: Error
>> Event Source: DhcpServer
>> Event Category: None
>> Event ID: 1008
>> Date: 8/1/2005
>> Time: 9:28:24 PM
>> User: N/A
>> Computer: DIMENSION2
>> Description:
>> The DHCP service is shutting down due to the following error:
>> The service has returned a service-specific error code.
>>
>> Event Type: Error
>> Event Source: DhcpServer
>> Event Category: None
>> Event ID: 1018
>> Date: 8/1/2005
>> Time: 9:28:24 PM
>> User: N/A
>> Computer: DIMENSION2
>> Description:
>> The DHCP service failed to restore the database. The following error
>> occurred:
>> An error occurred while accessing the DHCP database. Look at the
>> DHCP server event log for more information on this error.
>>
>> Event Type: Error
>> Event Source: DhcpServer
>> Event Category: None
>> Event ID: 1014
>> Date: 8/1/2005
>> Time: 9:28:24 PM
>> User: N/A
>> Computer: DIMENSION2
>> Description:
>> The following problem occurred with the Jet database -1811: Jet database
>> read or write operations failed. If the computer or database has just
>> been upgraded, then this message can be safely ignored. If this message
>> appears frequently, either there is not enough disk space to complete
>> the operation or the database or backup database may be corrupt. To
>> correct this problem, either free additional space on your hard disk or
>> restore the database. After you restore the database, ensure that
>> conflict detection is enabled in DHCP server properties. For information
>> about restoring the database, see Help and Support Center. Additional
>> Debug Information: JetRestore.
>>
>> Event Type: Error
>> Event Source: DhcpServer
>> Event Category: None
>> Event ID: 1004
>> Date: 8/1/2005
>> Time: 9:28:24 PM
>> User: N/A
>> Computer: DIMENSION2
>> Description:
>> The DHCP service failed to initialize the database. The following error
>> occurred:
>> %%65535
>>
>
>




Similar ThreadsPosted
Re: How to install security configuration wizard December 30, 2005, 2:24 pm
DHCP Authorisation - does it stop rouge DHCP servers? November 28, 2007, 6:46 am
Kerberos and HOST Headers December 31, 2005, 6:40 pm
Radius with dynamic dns clients September 25, 2008, 4:14 pm
c2 failed login correlation to an origination IP/host ? June 22, 2005, 11:35 am
802.1x host auth fails with WinXP supplicant June 26, 2006, 3:41 pm
TechNet Webcast: grow your IT org into a dynamic infrastructure September 12, 2006, 2:06 pm
Dynamic DNS Update Corruption of Active Directory January 10, 2007, 12:39 pm
Remote Desktop Protocol October 29, 2007, 5:16 pm
Need Help Understanding Scope of CIFS Protocol March 15, 2007, 2:06 am

Our other projects:

Art Dolls, Fairies and Mermaids - Sunnyfaces.net

Roy's Linux, Programming and Search Engines messages

1-Script XML SitemapXML Sitemap