|
Posted by Cameron Snyder on July 14, 2008, 10:53 am
Please log in for more thread options Joe, check out device manager to see if your IR receiver is properly
'drivered up' and working properly. The light indicator means it is talking
to the remote, but it may not be talking to the computer.
> Hi, "Chappy" and thank you for your remarks.
>
> I had already run setup again but ran it again once more with no luck. I
> don't have a cable box and am just connected directly to the cable. WMC
> works fine and I can start it using my mouse; it's just the remote that
> does
> not work although I can see that it is emmitting a signal to the remote
> receiver since a red light comes on. It's just that nothing happens after
> that.
>
> I'll try re-installing the old defective Tuner card to see if the remote
> works with that as it did before I changed it out. The old tuner card was
> changed because it appeared to be causing the computer to lock up once WMC
> had been started.
>
> I'm wondering however whether the remote has anything to do with the tuner
> card.
>
> If the remote works with the old card then the remote is OK and it must be
> a
> software issue and I have no idea what I can do further. I don't believe
> I
> can reinstall WMC itself since it is a part of Vista Ultimate.
>
> Let me know if you have any further ideas or if you can confirm whether
> the
> remote has anything to do with the tuner card. I appreciate your help.
>
> Joeshab
>
| 
XML Sitemap