|
Posted by Shady Character on April 28, 2006, 12:07 pm
Please log in for more thread options I had exactly the same problem and here's the answer. It's a pain in the
aqq, but it worked for me.
Physically Disconnect ALL devices from the USB Hubs on your PC.
Go to your Control Panel Device Manager and Delete ALL USB Hubs
Physically Re-plug all devices into the USB Hubs on your PC.
Re-Boot your PC
--
Shady Character
"Patty MacDuffie" wrote:
> Did you install ActiveSync initially from the CD? I did not initially and
> had all sorts of issues. I did a cold reset of the device and installed it
> from the CD this time and it added additional USB drivers. I haven't had
> too many problems since - though it's not perfect.
>
> The other thing is that I never restart the device while it is connected to
> the computer. I have backup software that runs every day and it does a
> restart automatically. I have to make sure it isn't connected when this
> happens, for instance.
>
> Make sure your device is not connected to the computer when you boot up (the
> computer). ActiveSync should be fully loaded before you connect your
> device.
>
> Keeping these things in mind has generally solved ActiveSync issues for me.
> --
> Patty MacDuffie
> www.computerhaven.info
>
> "Chris" <cjoseph(at)mnrubber.com> wrote in message
> > When I connect my 8125 to my laptop Activesync just sits at "Connecting"
> >
> > Here's what I've checked/done:
> >
> > Turned off MS Firewall
> > Verified IP of mobile device 169.254.2.2
> > Ethereal capture shows device trying to access port 5679 on 169.254.2.1.
> > Port is unreachable.
> >
> > netstart shows 127.0.0.1 listening on 5679.
> >
> > Where am I going wrong?
> >
> > Thanks much.
>
>
>
| 
XML Sitemap