Click here to get back home

Activesync synchronization error frustrations

 HomeNewsGroups | Search | About
 microsoft.public.pocketpc.activesync    Post an article   get this group's latest topics as an RSS feed add this group's latest topics to your My MSN content add this group's latest topics to your My Yahoo content
Subject Author Date
Activesync synchronization error frustrations Peter 05-18-2006
Posted by Peter on May 18, 2006, 7:09 pm
Please log in for more thread options
Hello

Just discovered that if any of the apps/data sources have a failure in
exchanging data you get the general error message "synchronization
failure" and nothing happens.
In my case avantgo was using a proxy while I was directly connected to
the internet, hence avantgo could not make a connection.
Activesync does not tell me any of this.

If anybody from microsoft is reading here please please make activesync
more user friendly and more robust.
        - If one data source fails still sync the other data sources and tell
which one failed.
        - Give access to the Tools->options in cause of failures so that
apps/data source can be enabled/disabled to figure out which
ones do or don't work.

PLEASE HAVE A LOOK at HOTSYNC FROM PALM, THAT ONE WORKS!
regards
Peter

Posted by Paco Plus on May 19, 2006, 5:12 am
Please log in for more thread options
Hi Peter:

You're not alone. I see so many people talking about unestabilities and bugs
with activesync...

Please Microsoft team, try to take a look with google (better than Microsoft
search) with words like 'Activesync 4.2', read what your users think about in
outside forums.

Best regards,

Paco Plus

"Peter" wrote:

> Hello
>
> Just discovered that if any of the apps/data sources have a failure in
> exchanging data you get the general error message "synchronization
> failure" and nothing happens.
> In my case avantgo was using a proxy while I was directly connected to
> the internet, hence avantgo could not make a connection.
> Activesync does not tell me any of this.
>
> If anybody from microsoft is reading here please please make activesync
> more user friendly and more robust.
>         - If one data source fails still sync the other data sources and tell
> which one failed.
>         - Give access to the Tools->options in cause of failures so that
> apps/data source can be enabled/disabled to figure out which
> ones do or don't work.
>
> PLEASE HAVE A LOOK at HOTSYNC FROM PALM, THAT ONE WORKS!
> regards
> Peter
>

Posted by Peter on June 2, 2006, 2:56 pm
Please log in for more thread options
I've sold my pocket pc and went back to a palm (tx). I could not take it
much longer. Software is very unstable ( Setting an morning alarm the
device froze multiple times it went off in the morning) Networking is a
nightmare to setup and for activesync a school graduate in his spare
time could do a better job.
If you are looking for agenda, mail, tasks and expense management stick
with Palm. Avantgo is perfect for reading the morning news on the plane,
no hassle with folding papers in such a way they are not in your fellow
passengers face. The tx was a breeze to setup, getting it to sync with a
PC, internet via wireless connection and bluetooth via mobile phone.
Extensive status reporting for each sync session.

And the tx is way cheaper than most pocket pc's too.

Peter

Paco Plus wrote:
> Hi Peter:
>
> You're not alone. I see so many people talking about unestabilities and bugs
> with activesync...
>
> Please Microsoft team, try to take a look with google (better than Microsoft
> search) with words like 'Activesync 4.2', read what your users think about in
> outside forums.
>
> Best regards,
>
> Paco Plus
>
> "Peter" wrote:
>
>> Hello
>>
>> Just discovered that if any of the apps/data sources have a failure in
>> exchanging data you get the general error message "synchronization
>> failure" and nothing happens.
>> In my case avantgo was using a proxy while I was directly connected to
>> the internet, hence avantgo could not make a connection.
>> Activesync does not tell me any of this.
>>
>> If anybody from microsoft is reading here please please make activesync
>> more user friendly and more robust.
>>         - If one data source fails still sync the other data sources and tell
>> which one failed.
>>         - Give access to the Tools->options in cause of failures so that
>> apps/data source can be enabled/disabled to figure out which
>> ones do or don't work.
>>
>> PLEASE HAVE A LOOK at HOTSYNC FROM PALM, THAT ONE WORKS!
>> regards
>> Peter
>>

Similar ThreadsPosted
ActiveSync 4.5 Synchronization error with WM6 April 30, 2008, 3:14 am
Activesync 80883001 forced re-synchronization error April 12, 2008, 10:47 am
synchronization error June 18, 2005, 11:54 am
Synchronization Error July 26, 2005, 5:38 pm
Synchronization Error August 18, 2005, 10:37 pm
Synchronization Error August 31, 2005, 8:31 am
Synchronization error November 11, 2005, 9:43 am
Synchronization error February 18, 2006, 12:21 am
Synchronization Error (new thread) August 18, 2005, 11:22 pm
Synchronization error needs resolution September 30, 2005, 7:52 am

Our other projects:

Art Dolls, Fairies and Mermaids - Sunnyfaces.net

Roy's Linux, Programming and Search Engines messages

1-Script XML SitemapXML Sitemap