|
Posted by Krishna on March 29, 2007, 12:40 am
Please log in for more thread options Hi Robyn
Check this following link.I hope it helps you...
http://www.geekzone.co.nz/content.asp?contentid=1423
Krishna
"Robyn Harcott" wrote:
> Hi Jasper Thanks for your response
>
> I have setup 1 Bluetooth Com Port - Com4.
> I'm using a Belkin USB 2.0 adapter (connects at 2.1).
> My Windows does not recognize it so I have installed the drivers from the
Belkin CD.
> From the Bluetooth Setup, active sync will only allow me to connect using
Com3. From ActiveSync itself, I can choose Com1, 3 or 4.
> I can connect via generic serial com 4 through the Bluetooth manager. I can
see my device from my pc (XP2).
>
> If I run bthprops.cpl - nothing happens.
>
> Any help is appreciated.
>
> Robyn
>
>
> > Hello All
> > I have a MotoQ (Telus) and Active Sync 4.5 on my desktop. I have a
bluetooth connection that I would like to use to sync my outlook calendar. I
can make the connection and see the phone, but Active Sync will not recognize
that there is a device.
> > Any suggestions? I've done a search but can't find any definitive
instructions on how to make this work.
> >
> > TIA
>
> Have you setup any Bluetooth COM Ports? What Bluetooth adapter are
> you using?
>
> Usually you have to add a Bluetooth COM port, then enable connectivity
> within ActiveSync on that COM port that you added.
>
> If your using XP SP2 native Bluetooth drivers, its not that hard.
>
> Go to run and type "bthprops.cpl" If this shows your paired Bluetooth
> devices, you should be using XP SP2 Native drivers...you can always
> check this list too:
>
> http://support.microsoft.com/default.aspx/kb/841803
>
> Cordially,
>
>
> Jasper Morse
|