|
Posted by nikj_dk on February 4, 2008, 3:42 am
Please log in for more thread options Thanks, I´ll try that.
--
Regards,
Niels P.
"Chris De Herrera" wrote:
> Hi,
> The problem is that the host to IP address is cached in the PPC until a soft
> reset is performed.
>
> If you allow the PPC to access the internet via the PC then you can sync.
> Or you can allow the PPC to connect to the internet via wireless while it is
> in the doc.
>
> --
> Chris De Herrera
> http://www.pocketpcfaq.com
> http://www.pocketpctalk.com
> http://www.tabletpctalk.com
> http://www.mobilitytalk.com
>
> >I sync my PPC to Exchange on SBS2003. When I install my PPC, I use a dock
> > connected to my ws connected to the local network/intranet. I set up
> > parameters, and write the servername, and the PPC syncronizes with
> > Exchange.
> >
> > To syncronize via internet, I have to change the servername to the ip
> > address of the SBS2003, because the FQD has a different ip address from
> > the
> > SBS2003 server.
> >
> > That means, when I put the PPC in its dock, it cannot syncronize, but when
> > it is out of the dock, it works fine.
> >
> > Is there a way to make the PPC choose one of two possebilities, either the
> > servername, or the ip address?
> >
> > Regards.
> > --
> > Regards,
> > Niels P.
>
>
| 
XML Sitemap