|
Posted by jeanwelly on July 19, 2007, 7:42 am
Please log in for more thread options
>>
>> [snip]
>>
>> > if I print "$1\n",
>> > the file prints just fine. But, if I do something like print "$1 after
>> > \n", the whole output is messed up. If I print "before $1\n", nothing
>> > prints at all. If I print "before $1 after\n", only after prints.
>>
>> not really sure, but could be a rogue "\r" in $1,
> There
> is a rogue carriage return (0xd) in the string
> Is there something I can do to deal with this
> situation?
Repair the corrupted file:
perl -p -i -e 'tr/\r//d' bad_file
--
Tad McClellan SGML consulting
tadmc@augustmail.com Perl programming
Fort Worth, Texas
|
|
Posted by Mirco Wahab on July 19, 2007, 7:50 am
Please log in for more thread options
>>
>> [snip]
>>
>> > if I print "$1\n",
>> > the file prints just fine. But, if I do something like print "$1 after
>> > \n", the whole output is messed up. If I print "before $1\n", nothing
>> > prints at all. If I print "before $1 after\n", only after prints.
>>
>> not really sure, but could be a rogue "\r" in $1,
> There
> is a rogue carriage return (0xd) in the string
> Is there something I can do to deal with this
> situation?
Repair the corrupted file:
perl -p -i -e 'tr/\r//d' bad_file
--
Tad McClellan SGML consulting
tadmc@augustmail.com Perl programming
Fort Worth, Texas
|
|
Posted by Sherm Pendley on July 19, 2007, 4:11 pm
Please log in for more thread options >>
>> [snip]
>>
>> > if I print "$1\n",
>> > the file prints just fine. But, if I do something like print "$1 after
>> > \n", the whole output is messed up. If I print "before $1\n", nothing
>> > prints at all. If I print "before $1 after\n", only after prints.
>>
>> not really sure, but could be a rogue "\r" in $1,
> There
> is a rogue carriage return (0xd) in the string
> Is there something I can do to deal with this
> situation?
Repair the corrupted file:
perl -p -i -e 'tr/\r//d' bad_file
--
Tad McClellan SGML consulting
tadmc@augustmail.com Perl programming
Fort Worth, Texas
|
|
Posted by Mirco Wahab on July 20, 2007, 4:56 am
Please log in for more thread options >>
>> [snip]
>>
>> > if I print "$1\n",
>> > the file prints just fine. But, if I do something like print "$1 after
>> > \n", the whole output is messed up. If I print "before $1\n", nothing
>> > prints at all. If I print "before $1 after\n", only after prints.
>>
>> not really sure, but could be a rogue "\r" in $1,
> There
> is a rogue carriage return (0xd) in the string
> Is there something I can do to deal with this
> situation?
Repair the corrupted file:
perl -p -i -e 'tr/\r//d' bad_file
--
Tad McClellan SGML consulting
tadmc@augustmail.com Perl programming
Fort Worth, Texas
|
|
Posted by jeanwelly on July 20, 2007, 7:05 am
Please log in for more thread options >>
>> [snip]
>>
>> > if I print "$1\n",
>> > the file prints just fine. But, if I do something like print "$1 after
>> > \n", the whole output is messed up. If I print "before $1\n", nothing
>> > prints at all. If I print "before $1 after\n", only after prints.
>>
>> not really sure, but could be a rogue "\r" in $1,
> There
> is a rogue carriage return (0xd) in the string
> Is there something I can do to deal with this
> situation?
Repair the corrupted file:
perl -p -i -e 'tr/\r//d' bad_file
--
Tad McClellan SGML consulting
tadmc@augustmail.com Perl programming
Fort Worth, Texas
|
| Similar Threads | Posted | | CGI System Call in perl | February 16, 2005, 6:06 am |
| Use system to start a server then execute commands on it | October 22, 2006, 9:38 am |
| Perl system call fails under windows 2003 server | June 14, 2007, 2:08 pm |
| How to get Perlscript in ASP / IIS to execute command line system calls | September 13, 2008, 1:38 am |
| ssh in system call | January 8, 2006, 2:13 am |
| system call - how to | May 1, 2007, 7:16 am |
| system call - how-to. | May 1, 2007, 7:22 am |
| system call | June 5, 2007, 2:03 pm |
| system call | June 6, 2007, 10:32 am |
| ssh using system call | February 7, 2008, 9:12 am |
|
XML Sitemap